Product Name: Pneumatic-Pneumatic Positioner(Rotary Type)
Input Signal: 0.2~1.0kgf/cm2(3~15psi)
Supply Pressure: 1.4-7.0 kgf/cm(20~100psi)
Air Connection: PT(NPT) 1/4
Gauge Connection: PT(NPT) 1/8
The Pneumatic Pneumatic Positioner YT-1200 series are used for pneumatic valve actuators by means of pneumatic controller or control systems with an output signal of 3 to 5 psi or split ranges.
- The product can operate normally in very extreme environment, such as vibration and temperature.
- The durability has been proven after testing 2 million cycles at the minimum.
- Response time is very short and accurate.
- Simple part change can set 1/2 Split Range.
- It is economical due to less air-consumption.
- Direct / Reverse action can be set easily.
- Zero & Span adjustment processes are simple.
- Feedback connection is easy.