Control Valves Manufacturer | THINKTANK
Home > Products > Control Valve > Cage guided Globe Control Valve

Product Name: Pressure Balanced Cage type Control Valve

Type: Straight-through, cast globe valve

Size: 1-1/2'',  2'',  2-1/2'', 3'', 4'', 5'', 6'', 8'' (DN40 – DN200)

Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN100, JIS10K~JIS40K)

Body Material: Carbon steel, Stainless steel, Alloy steel

Operation: Pneumatic diaphragm actuator, Pneumatic piston actuator, Electric actuator

Request a Quote

Contact Us


    The model TT-ACP pressure-balanced cage type control valves are designed for heavy duty service. The valve plug employs a pressure balance function to control high differential pressure fluid with small actuator force.

    The TT-ACP realizes seat leakage performance as single seat valve by seal ring structure. In addition, the TT-ACP is equipped the cage plug with a scraper ring to prevent a malfunction caused by foreign object enter between the cage plug and the cage. The actuator is adopted a compact and powerful diaphragm motor.

    The TT-ACP is widely applicable for reliable control of high or low temperature, high differential pressure process lines where dynamic stability, dynamic stability, low noise, anti-cavitation/flashing are required.


    Body Type: Straight-through, cast globe valve

    Nominal size: 1-1/2’’,  2’’,  2-1/2’’, 3’’, 4’’, 5’’, 6’’, 8’’ 

    Pressure rating:   • JIS 10K, 16K, 20K, 30K, 40K

                                • ANSI Class 125, 150, 300, 600

                                    • JPI Class 125, 150, 300, 600

    End connection:   • Flanged end;

                                    • Welded end; SW (1-1/2’’, 2’’), BW (2-1/2’’ to 8’’)

    For body/trim material combinations and operating temperature ranges, refer to Table 1.


    • Plain bonnet (-17 to 230°C)

    • Extension bonnet Type 1 (-45 to -17°C and 230 to 360°C)

    • Extension bonnet Type 2

    Integral cast type (-100 to -45°C),

    Welded type (-196 to -100°C)

    Note) Take care not to exceed the operating temperature ranges specified for respective materials.

    Gland type: Bolted gland

    Packing / Grease

    • Grease not provided

    When V-shaped PTFE packing or PTFE yarn packing is used.

    • Grease provided

    When graphite packing is used.


    Valve plug: Single seated pressure balanced type

    Cage: High-flow characteristics

    -Metal seat (For flow characteristics, refer to Figure 2.)

    -Equal percentage (%V)

    -Linear (LV)


    For body/trim material combinations and operating temperature ranges, refer to Table 1.

    Note) For fluid conditions that require Stellite, refer to Figure 3.

    Actuator Type: Single acting diaphragm actuator (Type HA)

    Action: Direct or reverse action


    Type HA: Cloth embedded ethylene propylene rubber

    Spring range:

    20 to 98 kPa {0.2 to 1.0 kgf/cmÇ}

    80 to 240 kPa {0.8 to 2.4 kgf/cmÇ}

    Supply pressure:

    Diaphragm actuator

    Type HA:140 to 390 kPa {1.4 to 4.0 kgf/cmÇ}

    Note) Allowable differential pressure varies depending on spring range and air supply pressure.

    Air connection: Rc1/4 or 1/4NPT internal thread

    Ambient temperature: -30 to 70 °C

    Valve action:

    Air-to-close (Direct action actuator is combined.)

    Air-to-open (Reverse action actuator is combined.)

    Optional accessories

    Positioner, pressure regulator with filter, hand wheel, limit switch, solenoid valve, motion transmitter, booster relay, lock-up valve, and others.

    Note 1)For optional items, refer to the specification sheets and installation drawings of the respective accessories.

    2)Accessories with the asterisk mark (*) are selected from among the following types depending on the actuators to be combined.

    Your Name:*
    Your E-mail Address:*
    Zip/Postal Code:*
    Phone Number:*

Related Products




Learn about valves


Control Valve Selection



Live Support