Control Valves Manufacturer | THINKTANK
Home > Products > Self operated Regulator > Steam Valve

Product Name: Float & Thermostatic Steam Trap|Cast Iron

SIZE: DN15~DN100 (1/2''~4'')

Material: Cast Iron

Request a Quote

Contact Us

  • Float and thermostatic traps are mechanical units that operate on both density and temperature principles. The float valve operates on the density principle. A level connects the ball float to the valve and seat. Once condensate reaches a certain level in the trap, the float rises, opening the orifice and draining condensate. A water seal formed by the condensate prevents live steam loss.

    Since the discharge valve is under water, it is not capable of venting air and non-condensables. When the accumulation of air and con-condensable gases causes a significant temperature drop, a thermostatic air vent in the top of the trap discharges them. The thermostatic vent opens at a temperature a few degrees below saturation, so it's able to handle a large volume of air-through an entirely separate orifice-but at a slightly reduced temperature.

    * Float-Thermostatics steam traps complete by the differential temperature type exhaust valve and the float ball stem and valve seat.


    Your Name:*
    Your E-mail Address:*
    Zip/Postal Code:*
    Phone Number:*
    Message:*

Related Products

Products

News

Industries

Learn about valves

FAQ

Control Valve Selection

FISHER

THINKTANK PROCESS MANAGEMENT. THINKTANK PROCESS MANAGEMENT. THINKTANK PROCESS MANAGEMENT.

Live Support